The Bike for Professional Cyclists from the Decathlon AG2R World Tour Team
The Van Rysel RCR Pro Dura-Ace Di2 is the same race-ready machine used by the Decathlon AG2R World Tour Team to compete at the highest level. Designed for pure performance, it’s built to excel in the world’s biggest races. The only modification? A 52/36 chainring setup, tailored for dedicated cyclists.
The RCR Range
The RCR lineup is built for cyclists who refuse to compromise. Every tube’s cross-section is engineered for optimal efficiency in key wind angles (-15° to +15°).
This "lightweight aero" bike strikes the perfect balance of weight, stiffness, and aerodynamics—delivering an exceptional ride. If you're looking for a race-winning machine, the RCR is it.
RCR vs. RCR Pro: What Sets Them Apart?
The Van Rysel RCR and RCR Pro share the same aggressive race geometry, but the difference comes down to carbon technology. The RCR uses high-modulus carbon for a stiff, efficient ride that delivers speed and responsiveness. The RCR Pro takes it further with super high-modulus carbon, reinforcing key stress points while shedding weight for an even more explosive feel. Designed for elite-level racing, the RCR Pro frame is the same one used by Decathlon AG2R’s WorldTour riders.
A Closer Look at the Frame
The RCR frame weight (size M, painted): 1.83 lbs (830 g)
RCR Pro frame weight (size M, painted): 1.74 lbs (790 g)
RCR fork weight (size M, painted): 0.84 lbs (380 g)
Tire clearance: Up to 33 mm
Color variations may cause slight weight differences (+/- 0.11 lbs | 50 g)
Never clamp a carbon frame (top tube, seat tube, down tube) in a work stand or bike rack—carbon is rigid but vulnerable to compression.
Several Finishes to Choose From
Depending on the groupset and wheel configuration, we offer different finishes so you can ride a model that reflects your style. The RCR Pro frames feature a raw carbon finish with a matte varnish, leaving the carbon fibers exposed rather than covering them with paint. Every frame is unique, as each of the 450 individual pieces is hand-laminated in the mold, a process that saves up to 100 grams (3.5 oz).
Cockpit
Designed in collaboration with Deda, the RCR Pro’s cockpit enhances aerodynamics by minimizing the front surface while ensuring optimal ergonomics at all three contact points—levers, tops, and drops. Fully internal cable routing creates a sleek, streamlined profile.
The Deda x Var Rysel combo varies by frame size:
- XS: 90 × 380 mm
- S: 90 × 400 mm
- M: 100 × 400 mm
- L: 110 × 400 mm
- XL: 120 × 400 mm
Shimano Dura-Ace Di2 Groupset + Power Meter
The RCR Pro Team is equipped with the Shimano Dura-Ace R9200 Di2 12-speed groupset—the fastest, most advanced drivetrain Shimano has ever developed.
The Dura-Ace FC-R9200-P power meter provides precise, real-time data for performance-focused cyclists. Featuring a Li-ion rechargeable battery and seamless Bluetooth® LE & ANT+ connectivity, it’s easy to set up and integrate with your training tools.
Shimano Dura-Ace Di2 12-Speed Drivetrain
- Shifters: Shimano Dura-Ace R9270
- Front Derailleur: Shimano Dura-Ace KFDR9250
- Rear Derailleur: Shimano Dura-Ace KRDR9250D (34T max)
- Cassette: Shimano Dura-Ace KCSR9200 (11-34T)
- Crankset: Shimano Dura-Ace KFCR9200 (52/36) with power meter
- Chain: Shimano Dura-Ace KCNM9100 12-speed
Crank Length by Frame Size:
- XXS/XS: 165 mm
- S: 170 mm
- M: 172.5 mm
- L: 175 mm
Drivetrain Maintenance
Regular maintenance is key, especially in wet or dirty conditions.
Check chain wear often using a chain wear indicator.
A well-maintained drivetrain lasts longer and performs better.
Drivetrain Lifespan
When purchasing a bike, consider the long-term cost of drivetrain maintenance. Lifespan varies based on care and riding conditions, but here are general estimates:
Chain lifespan: ~3,100 miles (5,000 km)
Cassette lifespan: ~6,200–7,500 miles (10,000–12,000 km)
A neglected chain can skip, causing premature wear or even damage to your frame. Regular maintenance is key.
Disc Brakes
Equipped with Shimano Dura-Ace hydraulic disc brakes, featuring 160 mm front and 140 mm rear rotors for powerful, progressive braking and optimal control in all conditions.
Bedding-In Process:
To maximize braking efficiency, gradually brake 20 times at low speed (12 mph / 20 km/h), then repeat at 18 mph (30 km/h). Be sure to bed in both brakes to enhance friction between the pads and rotors.
Hydraulic Brake Maintenance
Hydraulic brakes operate within a closed system, with a hose maintaining the seal between the brake lever and caliper.
Over time, a slight loss of pressure is normal, which can reduce braking efficiency. If your brake lever feels too soft or pulls all the way to the handlebar, it's time to bleed the system. This process requires specialized tools and expertise.
Warning and Adjustment
Never squeeze the brakes without a wheel installed—this can cause the brake pads to stick together.
If the rotor rubs against the pads, follow these steps to realign the caliper:
- Loosen the brake caliper bolts.
- Squeeze the brake lever firmly.
- While holding the brake, tighten the caliper bolts.
If the issue persists, visit your nearest bike shop for further adjustment.
Swiss Side Hadron² 500 Ultimate Wheels
Leveraging its Formula 1 expertise, Swiss Side delivers cutting-edge aerodynamics and engineering to create some of the fastest wheels on the market. Designed for minimal drag and exceptional stability in crosswinds, these wheels maximize speed and efficiency.
- Hubs: DT Swiss ARC 180 with Hyperglide technology
- Bearings: SINC ceramic for ultra-smooth performance
- Rim Profile: 50 mm deep, 20 mm internal width
- Weight (pair): 3.24 lbs (1470 g)
Continental Tires: Performance & Aero Optimization
- Rear: GP 5000 S TR, 28mm
- Front: Continental Aero 111 TLR, 29mm
Tubeless or Inner Tube?
We recommend converting your tires to tubeless using the included tubeless valves.
Why go tubeless?
- More comfort
- Better efficiency
- Self-sealing for small punctures
However, always carry an inner tube in your repair kit for larger punctures.
Position
RCR Carbon Seatpost features a -15mm offset for an aggressive riding position.
Seat Post Length by Size:
- XS: 316 mm
- S: 331 mm
- M: 356 mm
- L/XL: 406 mm
Fizik Argo 00 Saddle:
Engineered for performance, the Fizik Vento Argo 00 features a short-nose design for superior stability and pressure relief. Developed with pro riders, this lightweight, race-ready saddle helps you stay locked in for maximum power output.
Weight: 134 g (140 mm width)
Pedals
Sold without pedals.
Which Size?
Refer to the bike frame geometry table for precise sizing.
- Smaller size: More responsive and agile
- Larger size: Better comfort for long distances
If you're between sizes, choose based on your riding style and fit preference. For best results, we recommend a professional bike fit.
Warranty
- Frame & Fork: 5 years
- Parts: 2 years (excluding wear items)
Product Disclaimer
Specifications and features may change without notice. We strive for accuracy but cannot guarantee all descriptions, images, or details are error-free. Variations do not warrant modifications, exchanges, or refunds. Products may be updated or discontinued at any time. For more info, contact customer support.
RCR Pro Super High Modulus Carbon
Shimano Dura-Ace R9200
Swiss Side Hadron² ULT 500
